Road Markings

 We have often noticed the different markings on the road. But do you know what they indicate? What is the intention of such markings? The basic purpose of road markings is to lead and manage traffic on roads and highways. They boost the function of traffic signs. The markings act as a psychological barrier to the motorist by particularly delineating the traffic route. The secure movement of traffic by lateral clearance mostly avoids the drivers from traffic menaces. Therefore, road marking symbols are extremely important to guarantee a safe, smooth, and harmonious traffic gush. The types of road markings seen include longitudinal markings, transverse markings, object markings and special markings marked on the roads to alert the driver about hazardous locations/cuts/traffic movement on the road etc. There are Road marking machine dealers in Delhi who can assist you to get a suitable machine for the precise marking work.

Road markings can be categorised in the following ways :

longitudinal markings.

transverse markings.

object markings.

word messages.

marking for parking.

marking at hazardous locations.

The two main types of markings explained here are :

Longitudinal and Circle markings.

Longitudinal markings.

These markings are used to mark the direction of traffic on the roadway externals. The goal of these markings is to communicate to the driver that the lane ahead is the proper lane to follow on the roadway by Surface preparation equipment dealers in Gurgaon. A few of the guiding principles in longitudinal markings can be –

o  Longitudinal markings help to separate traffic flow in the same directive for which the principal colour used is white.

o  Yellow colour is used to split the traffic flow in opposing directions and also to split the pavement edges.

o  The lines marked are either broken, solid or double solid.

o  Broken line markings mean you are permitted and allowed to cross with discretion if the traffic situation permits.

o  Solid line markings are restrictive and do not allow crossing except for entry or exit from a side road. This is to avoid a stationary obstruction.

o  Double solid lines demonstrate severity in restrictions. They should not be crossed except in an emergency.

There is a possibility to mark a combination of solid and broken lines. A solid line must be crossed wisely if the broken line of the combination is closer to the direction of travel. If Vehicles are coming from opposite directions then the line should not be crossed.

o  Other types of longitudinal markings include centre lines, traffic lanes, no-passing zone apart from warning lines, border or edge lines, bus lane markings, and cycle lane markings. Spray paint machine dealers in Gurgaon supply such machines in suitable condition and can be trusted for the job.

The history of road marking dates back to 1911 when Edward Hines the chairman of the Wayne County Board of Roads got the idea of marking the centre line of the road. He had noticed a leaky milk truck make its way down the road which gave him the idea of road markings as per the Michigan Transportation.

Since then, different types of paint have been used for road marking. These include solvent-based, water-based, hot-applied thermoplastics, epoxy, two-component MMAs and performed reflective tapes. Application techniques like brush application, screeding, extrusion and spray etc. are used for road marking.

However, hot-applied thermoplastic road markings are the most popular. Road markings serve an important role in guiding and controlling traffic. They are a psychological barrier and signify the drawing of the traffic path by channelising the movement of pedestrians and cyclists into the safe zones.

Alpha Marketing are the best Road marking machine dealer in Noida who can cater to all your needs related to road markings to wood sanding.