The Procedure & the benefits of Injection Grouting

For the purpose of reducing cracks, voids, and honeycomb areas the filling of Cement slurry or waterproofing chemical is done with the help of a pressure Injection Grouting pump on the concrete surface. This whole process is known as Injection Grouting. Injection Grouting Pump dealers in Delhi provide a wide range of branded high–pressure injection grouting pumps at very affordable rates. 

Generally, for the purpose of making water-resistant, in waterproofing of the basement or any tank, for preventing any leakage Injection Grouting pump is used. Without the process of injection grouting waterproofing work is never finished it’s the most important part of the waterproofing process.

The procedure of Injection Grouting is as follows :

•First of all, we need to understand the meaning of grout. Grout is mainly the mixture of water, cement, and sand which results in a slurry-like cement viscous fluid that is used for repairing a crack and filling voids.

•Before starting the process of injection grouting we need to ensure that in which place we have to do grout.

•It is most important to know about the place where the grouting is going to be done as it may be on height or base. If the grouting process will take place on the height then we require a high-pressure injection grout machine which can be manual or automatic.

•To do the process of injection grouting, the very first step is to drill the surface of the concrete wall with a drill machine, the hole which is done may vary in size and depth of its diameter.

•Then the next step is to drill the hole at every joint and make the distance of the hole of 500mm c/c center to center.

•After the process of drilling the aluminum pipe or nipple is installed into the hole, and then it has to be fixed with cement paste, the cement mixture has to be pasted around the pipe after installing all pipes and it should be left for one day for the setting.

•It will become non-movable after setting cement around the pipe or nipple then the process of filling of slurry can be started into the hole with the help of a pressure injection grout Machine.

Mentioning below some of the benefits of the process of Injection Grouting:

•It makes the wall water-resistant or waterproof.

•It helps in Reducing the voids and crack.

•It provides a great finish to the wall.

•It is considered as the best repair for Honeycomb.

•It provides strength to the wall or damaged area.

•It is very easy to apply.

•It requires less time.

•It is an Environment-friendly process.

•It is a budget-friendly process too.

•In this process, there is only a 1% chance of wastage of material.

•Handling of equipment is very easy and workable in the process of Injection Grouting.

Hence, it is very important and recommended to do the process of injection grouting for various reasons. The condition of Road Marking is very crucial for road safety as it is sometimes invisible. Proper Road Markings help users to navigate the road safely and also make road users aware. A wide range of branded equipment that is long-lasting and very easy to use can be easily available with the Road marking machine dealers in Faridabad.