How to do the maintenance of an Airless Paint spray Machine?


Airless Paint Spray Machines refers to those mechanical air motors that provide higher efficiency even with lower air inlet pressure and it is specifically designed for handling a variety of coatings with powerful spray in the toughest working conditions. Airless Paint spray dealers in Ghaziabad provide an economical, easy and modern way of applying coatings and it is not even that difficult to maintain.

Providing some beneficial tips to maintain these Airless Paint Spray Machines :

•It is suggested to use the appropriate size filters for the material being sprayed as the correct filter Reduces the tip Clogs.

•It is advisable to check filters daily, if it is clogged more than 20% or if it is punctured and should be replaced immediately.

•It is recommended to check hoses visually as whenever we spray for internal build-up, cracks, kinks, holes, blisters it damages the hose cover.

•Two wrenches should be used when tightening all hose connections.

•We should ensure a good air-flow path into the motor and it should be wiped and cleaned properly after each use.

•The airless paint sprayer machine should not be covered with a rag or plastic while spraying.

•It is advisable to allow good airflow to keep the sprayer cool. 

•The machine should not be pressure washed.

•If raw paint appears on the machine it should be tightened properly until the packing nut 1/8 turn or until weeping stops. 

•We should keep in mind that over-tightening can overwork the pump and will reduce the performance. 

•The tips should be cleaned with a soft brush and these tips can be stored for short periods in a sealed container of water or solvent.

•In cold climates, it is recommended to not allow water or paint to freeze in internal parts or the hoses as if water freezes inside then it can cause severe damage.

•It is advisable to check gas Units and to Check oil levels. The oil should be changed if it is indicating the owner’s manual.

•It is recommended to bring a sprayer for a general service check at an authorized repair center.              

Hence, these are some points that are to be remembered while doing the maintenance of an Airless Paint Spray Machine. Spray Paint Machine Dealers in Noida guides in advance only with all these maintenance steps so that the buyers can get the best results from the beginning.

 

Comments

Popular posts from this blog

Top 7 chemical waterproofing methods

PROS AND CONS OF TILE INSTALLATION ON ROOFS!

Road Marking Machine | Wood Sander Dealers In Faridabad